ORION Keypad Login Manual – Quick Start Guide

ORION Keypad Login Manual – Quick Start Guide

Here are the key points from the document you’re viewing 

🔑 User Interface Module (UIM/UIL)

  • ENTER key: activates functions, changes parameters, confirms changes, moves down the menu tree.
  • EXIT key: exits menus, cancels inputs, moves up the menu tree.
  • Arrow keys: move cursor, access new menus/options, adjust parameter values.

🔐 Default Password

  • The default login sequence is:
    Arrow Up → Arrow Up → Arrow Down → EXIT → EXIT → ENTER

⚙️ Changing Parameters

  • Parameters can be modified by selecting with ENTER, adjusting with arrow keys, and confirming with ENTER.
  • Example: defining rectifier functions (e.g., changing the number of rectifiers or setting alarm triggers).
  • From Setup menu, select RM NUMBER to define the correct number of rectifiers.

🌐 Web Interface

  • ORION can be accessed via a web browser for configuration and supervision.
  • Requires connecting a computer to the ORION controller with a LAN cable.
  • Default IP address: 192.168.100.100
  • Login page appears after entering the address in a browser.

✅ In short: The manual explains how to use the ORION controller’s interface (keys, password, parameter changes) and how to access its web-based configuration tool.

Would you like me to also create a step-by-step quick reference guide (like a checklist) so you can use it directly when operating the controller?


    • Related Articles

    • Orion Controller Operation Manual

      Summary of the Orion Controller Operation Manual ? Overview The manual describes the Orion controller’s local user interface (UIL & UIM1), menu structure, and operational modes. It explains configuration, monitoring, alarms, logging, and control ...

    • Orion Controller display Operating Manual

      Operate an Orion Touch Controller, swipe horizontally to navigate between pages, tap icons to select functions, and swipe vertically to scroll lists. Tap a menu line to open a submenu and swipe left-to-right to go back to the previous menu. When ...

    • Orion Touch Controller Login Process Web interface

      Delta Orion-Touch Web user interface feature For Login to a Delta Orion controller with a local or remote PC, we typically use a web browser and connect via an Ethernet connection. Orion controller's had common default IP address and then enter the ...

    • RECIFIER PAHASE ASSIGNMENT IN SMPS/ BSNL SMPS

      FOR RECTIFIER PHASE ASSIGNMENT DO THE FOLLOWING STEPS. In main menu go in the Rectifier Option In Rectifier option go in AC measurement option Rectifier > AC Measurement In AC Measurement, Select the line assign L1, L2, L3 which you want (L1= R ...

    • Genset Not turning On upon Mains Fail

      There could be any of the following three reasons for Genset not getting started upon mains fail: 1. DG common fault is active. This fault is related to DG so we should check DG connections, its internal alarms, or there could be a problem with DG ...