RECIFIER PAHASE ASSIGNMENT IN SMPS/ BSNL SMPS

RECIFIER PAHASE ASSIGNMENT IN SMPS/ BSNL SMPS


FOR RECTIFIER PHASE ASSIGNMENT DO THE FOLLOWING STEPS.
In main menu go in the Rectifier Option
In Rectifier option go in AC measurement option 
Rectifier > AC Measurement
In AC Measurement, Select the line assign L1, L2, L3 which you want
(L1= R Phase, L2= Y phase, L3 = B phase 
Touch the Start Assignment 
Insert insulated thin stick/ pin to rectifier reset switch and push this button.
Rectifier communication LED is starting to blink, then same time touch on the bottom Right Click in start assignment window.
When this communication LED blink stop, then touch the Finish Assignment
Same process applicable for L2 and L3 phase also.



    • Related Articles

    • RECTIFIER FAULTY SMPS IS OUT OF WARENTY IN BSNL SMPS

      FOR BSNL SPMS IS OW, RECTIFIER FAULTY COMPLAINTS TO BE CLOSE ONLINE AND UPDATE THE R&R PROCESS, SHARE WITH CUSTOMER, ALSO SHAREED THE DELTA TRC CONTACT DETAILSTO FOLLOW THE R&R PROCESS MR. PRAVIT YADAV CONTACT NO. +917840038333
    • Battery not charging

      steps to be followed to rectify battery fault: Step by step procedure - go to next button Category to be created based on product like SMPS next article should open automatically (if problem not resolved.) Tagging in existing videos pdf not to be ...
    • Orion Controller Operation Manual

      Summary of the Orion Controller Operation Manual ? Overview The manual describes the Orion controller’s local user interface (UIL & UIM1), menu structure, and operational modes. It explains configuration, monitoring, alarms, logging, and control ...
    • Orion Controller display Operating Manual

      Operate an Orion Touch Controller, swipe horizontally to navigate between pages, tap icons to select functions, and swipe vertically to scroll lists. Tap a menu line to open a submenu and swipe left-to-right to go back to the previous menu. When ...
    • Orion Touch Controller Login Process Web interface

      Delta Orion-Touch Web user interface feature For Login to a Delta Orion controller with a local or remote PC, we typically use a web browser and connect via an Ethernet connection. Orion controller's had common default IP address and then enter the ...